Timegate References

Monitoring Spodumene Conversion in Lithium Processing with Timegated® Raman Spectroscopy

Written by Timegate | Nov 20, 2026, 11:11:32 AM

The challenge: Monitoring spodumene conversion for efficient lithium extraction

In lithium processing, converting α-spodumene into β-spodumene is an important step in preparing the mineral for lithium extraction. Naturally occurring α-spodumene has a stable crystal structure that makes lithium extraction challenging. During high-temperature calcination, the mineral undergoes a structural transformation into β-spodumene, which is more reactive and better suited for subsequent lithium extraction processes.

Achieving a high conversion degree while optimizing processing time and temperature is important for efficient production. However, determining how much α-spodumene has converted into β-spodumene requires an analytical method capable of distinguishing between the two crystal structures. Traditional laboratory techniques, including X-ray diffraction (XRD), can provide this information, but faster analytical feedback could help operators evaluate conversion conditions and optimize the process.

The solution: Measuring spodumene crystal structures with Timegated® Raman spectroscopy

Timegated® Raman spectroscopy provides a non-destructive method for identifying materials through their characteristic molecular and crystal lattice vibrations. Because α- and β-spodumene have different crystal structures, they produce distinguishable Raman signals. By measuring the relative intensities of these signals, it is possible to estimate the conversion degree from α-spodumene to β-spodumene.

Timegated® Raman spectroscopy also reduces fluorescence interference, which can make conventional Raman analysis challenging for certain mineral samples. This creates opportunities for obtaining analytical feedback during mineral conversion studies and evaluating how processing conditions influence the transformation.

The application: High-temperature calcination tests in the Keliber lithium project

As part of the Keliber lithium project in Central Ostrobothnia, Finland, Timegate Instruments investigated the use of Timegated® Raman spectroscopy for measuring spodumene conversion during high-temperature calcination. The measurements were performed during batch kiln furnace tests in May 2017.

Spodumene concentrate was heated to temperatures between 1025°C and 1075°C, where the transformation from α-spodumene to β-spodumene occurs. Samples were collected from the process at five-minute intervals and analyzed using a Timegate Raman spectrometer after a short cooling period.

The conversion degree was calculated using the characteristic Raman peak intensities of:

  • α-spodumene: approximately 707 cm⁻¹
  • β-spodumene: approximately 500 cm⁻¹

By following changes in these signals, the researchers could determine how the conversion progressed over time. The approach provided analytical feedback from the batch process without requiring continuous measurements inside the furnace.

The results: Following conversion progress over time

The measurements demonstrated that Timegated® Raman spectroscopy could distinguish between α- and β-spodumene and track changes in their relative concentrations during calcination. In one test conducted at 1075°C, samples were collected every five minutes after the furnace reached the target temperature.

The calculated β-spodumene conversion degree increased as follows:

Time Calculated β-spodumene conversion degree
0 minutes 35.1%
5 minutes 80.6%
10 minutes 99.8%
15 minutes 100%

 

The Raman spectra showed a decreasing α-spodumene signal and an increasing β-spodumene signal as the conversion progressed.

Key finding: Timegated® Raman spectroscopy successfully measured the progression of spodumene conversion, with the calculated conversion degree reaching approximately 100% after 15 minutes at 1075°C in the reported batch test.

 

What do these results mean for lithium processing?

The Keliber case study demonstrates several potential benefits of Timegated® Raman spectroscopy for spodumene conversion analysis:

  • Identifying crystal structures: Distinguishing α-spodumene from β-spodumene through their characteristic Raman signals.
  • Measuring conversion degree: Estimating how much of the mineral has transformed during high-temperature treatment.
  • Providing faster analytical feedback: Analyzing samples after a short cooling period to follow conversion progress.
  • Supporting process optimization: Providing information that can help evaluate calcination time and temperature.
  • Complementing conventional laboratory methods: Offering an additional analytical approach for investigating mineral phase transformations.

The results highlight the potential of Timegated® Raman spectroscopy to support the development and optimization of lithium processing operations.